| Customization: | Available |
|---|---|
| Application: | Industrial |
| Operating Speed: | Adjust Speed |
|
Still deciding? Get samples of US$ 200/Piece
Request Sample
|
Suppliers with verified business licenses
Audited Supplier Audited by an independent third-party inspection agency
1, Product Description
Introducing the revolutionary TYJX Series Frequency Conversion Drive High-Efficiency Rare Earth Permanent Magnet Synchronous Motor, a marvel of engineering crafted by the esteemed Taizhou Taicheng Electrical Equipment Co., Ltd., poised to transform the fan industry. This fully enclosed, air-cooled masterpiece sets a new standard for energy efficiency, soaring past GB30253-2013 norms, and proudly achieving Class 1 efficiency levels. By harnessing the power of rare earth permanent magnet materials, these motors, once magnetized, require no additional energy input, creating a steadfast permanent magnetic field that obviates the need for traditional electric excitation. This results in a motor that is not only remarkably efficient but also ingeniously simple, ensuring dependable operation with a sleek, lightweight design. Featuring rapid responsiveness and customizable capabilities to suit specific operational requirements, this motor seamlessly integrates cutting-edge electronic and microcomputer control technologies, propelling motor and drive system performance to extraordinary heights and heralding a new era of intelligent motor solutions. Its vast versatility across fan applications guarantees outstanding performance and unparalleled energy efficiency.
The Permanent Magnet Synchronous Motor presents an impressive array of superior features: an avant-garde design, a streamlined architecture, exceptional efficiency, and an enhanced power factor. It shines with its remarkable starting torque, extraordinary energy-saving capabilities, minimized noise, and reduced vibration, all while ensuring safe and reliable operation. Its superb efficiency and energy-saving attributes make it the favored choice across a wide spectrum of applications.
2, Features
High Efficiency:This motor's rated efficiency not only meets but exceeds national energy efficiency standards, achieving the esteemed national IE5 energy efficiency benchmark.
High Power Factor:Operating devoid of induction current excitation in the rotor, the stator winding acts as a resistive load, achieving a superior motor power factor beyond 0.95, effectively negating the need for reactive power compensation.
High Return on Electricity Saving:Depending on load conditions, replacing asynchronous motors with this innovative solution can yield a comprehensive power saving rate ranging from an impressive 15% to a remarkable 30%.
Small Current:Compared with 3-phase asynchronous motors, this motor's current demand is reduced by over 20%, eliminating the necessity for reactive power compensation. This efficiency can significantly trim infrastructure expenses in cables and transformers during planning.
Low Temperature Rise:With the absence of copper loss in rotor windings and reactive current in stator windings, the temperature rise is curtailed by more than 20k compared to asynchronous motors, ensuring cooler and more efficient operation.
Good Control Performance:The permanent magnet synchronous motor excels in control, offering zero-speed slip, exceptional dynamic responsiveness, precise speed regulation, and is impeccably suited for high-speed application scenarios.
3, Products Parameter
Motor Type |
Rated Power (KW) |
Voltage (V) |
Current (A) |
Frequency (HZ) |
Range of speed (rpm/min) |
Efficiency (%) |
Factor |
Torque |
IP Grade |
| TYJX-400 | 0.40 | 220/380 | 3.2/0.8 | 50/60 | 150/720 | 82.8 | 0.91 | 5.3 | IP55 |
| TYJX-550 | 0.55 | 220/380 | 4.2/1.25 | 50/60 | 150/720 | 83.9 | 0.92 | 7.3 | IP55 |
Principle of Energy Saving
1). Employing high-performance rare earth permanent magnet materials, the rotor establishes a stable magnetic field (derived from both permanent magnets and current). The stator's rotating magnetic field propels the rotor's magnetic field, guaranteeing the rotor's speed perfectly synchronizes with the synchronous speed without needing excitation currents or windings, thus realizing optimal energy efficiency.
2). Conversely, asynchronous motors rely on the induced current created in the rotor by the stator's rotating magnetic field to generate electromagnetic torque. This indirect generation results in the rotor operating below synchronous speed.
3). Permanent magnet motors feature a power density approximately 30% higher than asynchronous motors of equivalent power. Consequently, motors with the same power output are 1-2 frame sizes smaller, reducing both iron and mechanical losses.
4). Unleash the extraordinary with our Compact Permanent Magnet Motor! This expertly engineered marvel, designed for Direct Drive Applications, stands as a powerhouse in the industry. Experience its unrivaled efficiency, significantly surpassing that of equivalent asynchronous motors. Not only does it promise superior operational prowess, but its extensive high-efficiency range guarantees stellar performance. Be amazed by the motor's unwavering consistency, maintaining exceptional efficiency across a wide speed spectrum, from 25% to 100% of its rated capacity. Asynchronous motors, on the other hand, experience notable efficiency drops when operating below the 70% rated speed threshold.
5. Conditions of Use
1). Altitude: Specifically designed to excel at altitudes up to 1000 meters, this motor guarantees unmatched safety and reliability, even when operating at elevated heights.
2). Ambient Temperature: Expertly crafted to function effortlessly in ambient temperatures ranging from a crisp -15°C to a warm 40°C, this motor ensures consistent and reliable performance throughout every season.
3). Working Mode: Engineered for continuous and robust operation, this motor is designed to deliver unwavering performance in an S1 continuous working system.
4). Rated Voltage: Available in versatile options of 200V or 380V, adaptable to 50Hz or 60Hz frequencies, with a flexible tolerance of ±10%, this motor is tailored to meet diverse voltage requirements with excellence.
5). Featuring an IP55 enclosure protection grade, this motor is expertly crafted to withstand and thrive in challenging environmental conditions, showcasing remarkable durability and resilience.
6). Equipped with an IC410 cooling method, this motor guarantees superior thermal management, enhancing optimal performance and extending the product's longevity.
10. HONORS & CERTIFICATES
){kind=link}