| Customization: | Available |
|---|---|
| Application: | Industrial |
| Operating Speed: | Adjust Speed |
|
Still deciding? Get samples of $ !
Request Sample
|
Industry-leading Audited Factory
Suppliers with verified business licenses
Audited Supplier Audited by an independent third-party inspection agency
1, Product Description
Introducing the TYJX Series Frequency Conversion Drive High-Efficiency Rare Earth Permanent Magnet Synchronous Motor by Taizhou Taicheng Electrical Equipment Co., Ltd. This engineering marvel is purpose-built for the fan industry, offering a fully enclosed, air-cooled motor that embodies energy efficiency perfection. Surpassing the stringent GB30253-2013 standards to achieve Class 1 efficiency levels, it epitomizes excellence. The groundbreaking use of rare earth permanent magnets means these motors, once magnetized, maintain a potent magnetic field without additional energy input or traditional electric excitation. This not only ensures extraordinary efficiency but also a seamless, compact, and lightweight design. Rapidly responsive and customizable, this motor harnesses advanced electronic and microcomputer control technologies, elevating motor and drive performance to unprecedented heights. Ushering in a new era of intelligent motor solutions, it is perfectly suited for diverse fan applications, ensuring exceptional performance and energy savings.
The Permanent Magnet Synchronous Motor showcases an array of remarkable advantages: an innovative design, compact form, unbeatable efficiency, and a stellar power factor. Benefit from outstanding starting torque, superior energy-saving capabilities, minimal noise, reduced vibration, and safe, reliable operation. Its unparalleled efficiency and energy-saving attributes make it the top choice for numerous applications.
2, Features
High Efficiency:This motor not only meets but surpasses national premier energy efficiency standards, achieving the coveted national IE5 energy efficiency benchmark.
High Power Factor:By eliminating induction current excitation in the rotor, the stator winding becomes a resistive load, allowing for a power factor exceeding 0.95, effectively removing the need for reactive power compensation.
High Return on Electricity Saving:Dependent on load conditions, replacing asynchronous motors with this innovative solution can yield a comprehensive power saving rate between 15% and an impressive 30%.
Small Current:Compared to 3-phase asynchronous motors, this motor's current demand is reduced by over 20%, eliminating the need for reactive power compensation. This efficiency can significantly diminish infrastructure costs for cables and transformers during store planning.
Low Temperature Rise:With the elimination of copper loss in rotor windings and reactive current in stator windings, the temperature rise is reduced by over 20K compared to asynchronous motors, ensuring consistently cooler operation.
Good Control Performance:The permanent magnet synchronous motor excels in control performance, offering precise speed regulation, no speed slip, and superior dynamic response, ideally suited for high-speed application scenarios.
3, Products Parameter
Motor Type |
Rated Power (KW) |
Voltage (V) |
Current (A) |
Frequency (HZ) |
Range of speed (rpm/min) |
Efficiency (%) |
Factor |
Torque |
IP Grade |
| TYJX-370 | 0.37 | 220/380 | 2.8/0.85 | 50/60 | 300-1420 | 84.3 | 0.91 | 2.5 | IP55 |
| TYJX-550 | 0.55 | 220/380 | 4.0/1.25 | 50/60 | 300-1420 | 85.6 | 0.91 | 3.7 | IP55 |
| TYJX-750 | 0.75 | 220/380 | 5.2/1.62 | 50/60 | 300-1420 | 86.3 | 0.92 | 5.0 | IP55 |
| TYJX-1100 | 1.10 | 220/380 | 7.2/2.3 | 50/60 | 300-1420 | 87.4 | 0.92 | 7.4 | IP55 |
| TYJX-1500 | 1.50 | 220/380 | 9.6/3.2 | 50/60 | 300-1420 | 88.1 | 0.92 | 10.0 | IP55 |
Principle of Energy Saving
1). Utilizing high-performance rare earth permanent magnet materials, the rotor establishes a robust magnetic field (originating from both permanent magnets and current). The stator's rotating magnetic field propels the rotor's magnetic field, synchronizing the rotor's speed with the synchronous speed, thus achieving remarkable energy efficiency without requiring excitation currents or windings.
2). On the contrary, asynchronous motors rely on the induced current generated in the rotor by the stator's rotating magnetic field to create electromagnetic torque, causing the rotor to operate below synchronous speed.
3). Permanent magnet motors boast a power density approximately 30% greater than equivalent power asynchronous motors. Consequently, motors with the same power output are 1-2 frame sizes smaller, resulting in minimized iron and mechanical losses.
4). Discover the extraordinary advantages of our state-of-the-art permanent magnet synchronous motor. This innovative motor is engineered to deliver efficiency that is nothing short of remarkable, easily outshining asynchronous motors of similar power. Not only does it achieve exceptional efficiency, but it also boasts an impressively broad operational range at peak efficiency. Revel in its consistent high performance across a speed range from 25% to 100% of its rated speed. In stark contrast, asynchronous motors experience a significant efficiency drop when operating below 70% of their rated speed.
5. Conditions of Use
1). Altitude: This motor is expertly crafted to function flawlessly at altitudes up to 1000 meters, making it a reliable choice for a wide array of environmental conditions.
2). Ambient Temperature: Meticulously engineered to withstand ambient temperature fluctuations from -15°C to 40°C, this motor ensures dependable, year-round performance regardless of the season.
3). Working Mode: Designed for rigorous continuous operation (S1), this motor delivers unwavering and sustained performance for the most demanding applications.
4). Rated Voltage: Available in versatile 200V/380V, 50Hz/60Hz configurations with a tolerance of ±10%, this motor is adept at meeting a variety of voltage requirements efficiently.
5). With an IP55 enclosure protection grade, this motor is engineered for outstanding durability and offers robust resistance against external elements, ensuring long-term viability.
6). Skillfully designed with an IC410 cooling method, this motor provides exceptional thermal management, promoting durability and optimal performance over time.
10. HONORS & CERTIFICATES
){kind=link}