| Customization: | Available |
|---|---|
| Application: | Industrial |
| Operating Speed: | Adjust Speed |
|
Still deciding? Get samples of $ !
Request Sample
|
Industry-leading Audited Factory
Suppliers with verified business licenses
Audited Supplier Audited by an independent third-party inspection agency
1, Product Description
Introducing the avant-garde TYJX Series Frequency Conversion Drive High-Efficiency Rare Earth Permanent Magnet Synchronous Motor, a pinnacle of engineering excellence from the illustrious Taizhou Taicheng Electrical Equipment Co., Ltd., crafted to revolutionize the fan industry. This fully enclosed, air-cooled marvel sets new standards in energy efficiency, not only meeting but exceeding GB30253-2013 standards with its Class 1 efficiency rating. Utilizing cutting-edge rare earth permanent magnet materials, once magnetized, these motors require no further energy input, establishing a robust permanent magnetic field and eliminating the need for conventional electric excitation. This results in a motor that is supremely efficient, elegantly simple, and reliably compact and lightweight. With rapid response and customizable operational capabilities, it seamlessly integrates advanced electronic and microcomputer control technologies, enhancing motor and drive system performance to unprecedented levels and leading the way into a new era of intelligent motor solutions. Its remarkable versatility spans a wide array of fan applications, ensuring premier energy efficiency and outstanding performance.
The Permanent Magnet Synchronous Motor offers an unparalleled array of superior advantages: a futuristic design, compact architecture, and extraordinary efficiency accompanied by an enhanced power factor. It shines with its exceptional starting torque, remarkable energy-saving capabilities, minimized noise, reduced vibration, and assures safe, reliable operation. Its outstanding efficiency and energy-saving attributes make it the discerning choice across a broad spectrum of applications.
2, Features
High Efficiency:This motor's rated efficiency not only surpasses but epitomizes national energy efficiency standards, achieving the distinguished national IE5 energy efficiency benchmark.
High Power Factor:Functioning without induction current excitation in the rotor, the stator winding operates as a resistive load, yielding an exceptional motor power factor exceeding 0.95, effectively eliminating the necessity for reactive power compensation.
High Return on Electricity Saving:Depending on load conditions, transitioning from asynchronous motors to this groundbreaking solution can result in substantial power savings, with rates ranging from an impressive 15% to a remarkable 30%.
Small Current:In comparison to 3-phase asynchronous motors, this motor's current demand is reduced by over 20%, removing the need for reactive power compensation. This high efficiency can lead to significant savings in infrastructure costs for cables and transformers during store planning.
Low Temperature Rise:With no copper loss in rotor windings and no reactive current in stator windings, the temperature rise is reduced by over 20k compared to asynchronous motors, ensuring a cooler, more efficient operation.
Good Control Performance:The permanent magnet synchronous motor excels in control, offering zero speed slip, exceptional dynamic responsiveness, precise speed regulation, making it ideally suited for high-speed application scenarios.
3, Products Parameter
Motor Type |
Rated Power (KW) |
Voltage (V) |
Current (A) |
Frequency (HZ) |
Range of speed (rpm/min) |
Efficiency (%) |
Factor |
Torque |
IP Grade |
| TYJX-400 | 0.40 | 220/380 | 3.2/0.8 | 50/60 | 150/720 | 82.8 | 0.91 | 5.3 | IP55 |
| TYJX-550 | 0.55 | 220/380 | 4.2/1.25 | 50/60 | 150/720 | 83.9 | 0.92 | 7.3 | IP55 |
Principle of Energy Saving
1). Harnessing high-performance rare earth permanent magnet materials, the rotor generates a stable magnetic field (originating from both permanent magnets and current). The stator's rotating magnetic field propels the rotor's magnetic field, synchronizing the rotor's speed perfectly with the synchronous speed without the need for excitation currents or windings, thus achieving optimal energy efficiency.
2). Conversely, asynchronous motors rely on the induced current generated in the rotor by the stator's rotating magnetic field to produce electromagnetic torque, resulting in the rotor operating below synchronous speed.
3). Permanent magnet motors boast a power density approximately 30% greater than asynchronous motors of the same power. Consequently, motors with identical power output are 1-2 frame sizes smaller, reducing iron and mechanical losses.
4). Unleash the extraordinary potential of our Compact Permanent Magnet Motor! Expertly crafted for Direct Drive Applications, this motor stands as a true powerhouse within the industry. Experience its unmatched efficiency that sets it far above equivalent asynchronous motors. Not only does it promise superior operational efficiency, but its extensive high-efficiency range also ensures consistently outstanding performance. Marvel at the motor's remarkable consistency as it maintains exceptional efficiency across an impressive speed spectrum, from 25% to 100% of its rated capacity. In stark contrast, asynchronous motors suffer dramatic efficiency drops below the 70% rated speed threshold.
5. Conditions of Use
1). Altitude: Engineered to excel at altitudes up to 1000 meters, this motor ensures unmatched safety and reliability, even at elevated heights, providing peace of mind.
2). Ambient Temperature: Masterfully crafted to operate seamlessly in ambient temperatures ranging from a brisk -15°C to a warm 40°C, this motor promises consistent and dependable performance throughout all seasons, adapting to every climatic challenge.
3). Working Mode: Designed for continuous and robust operation, this motor is engineered to provide steadfast performance in an S1 continuous working system, ensuring reliable and uninterrupted service.
4). Rated Voltage: Available in versatile options of 200V or 380V and adaptable to 50Hz or 60Hz frequencies, this motor offers a flexible tolerance of ±10%, meeting diverse voltage requirements with superior excellence.
5). Featuring an IP55 enclosure protection grade, this motor is expertly designed to endure and withstand challenging environmental conditions, showcasing exceptional durability and resilience, ready for any environment.
6). Equipped with the IC410 cooling method, this motor ensures superior thermal management, promoting optimal performance and extending the product's longevity, making it a sustainable choice.
10. HONORS & CERTIFICATES
){kind=link}